Printer Set-Up And Operation; Prepare The Build Area - 3D Systems ProJet 4500 User Manual

14

PRINTER SET-UP and OPERATION

WARNING: Read and follow safety guidelines in Electrical Safety. Ignoring these guidelines could result in death,
bodily injury, or printer damage due to electrical shock or fire.
CAUTION: Verify printer's rear panel power switch is OFF. Connecting power with switch on can damage printer
and cause bodily injury or death due to sudden, unexpected mechanical motion.
NOTE: Power up the printer
This section will briefly introduce you to using 3DPrint
ready and actually print your part. For all the details on using 3DPrint

PREPARE THE BUILD AREA

Go to your printer and check each item listed below to ensure the printer is ready to print. It is important to check each of these items
before every build.
1. Check that the Deck,
are clean of any loose core material. Vacuum any ex-
cess core powder from the surface.
2. Check that the Debris Separator is empty and cleaned
of excess powder.
3D Systems, Inc.
to prepare your part for building. It will then show you how to get your ProJet
®
Fast Axis, and Build Bed
, refer to the 3DPrint User Manual.
® ®
33
4500
®