•
A part can also be rotated 90 degrees around Z-axis (top
view). A red box indicates that the part is outside the build
volume.
Scaling the Part: Select the part and choose Transform. If you
scale a part and it does not fit into the Build Bed, 3DPrint prompts
you with a warning telling you an object is extending beyond the
Build Bed boundaries and draws a red wire frame around the part.
In the Scale dialog boxes, you have several options:
•
Scale the part as an absolute percentage of its size when it was
first brought into the build volume by entering a percentage.
•
Scale a part to a specific size by entering dimension values
directly in the X, Y, and Z fields.
•
In order to shrink it in this orientation, it is necessary to scale
it by changing the Y-direction to eight (8) inches.
•
Part is no longer at the bottom and scales around center of
bounding box. Justify part(s) to bottom (or drag to bottom)
for ideal printing.
3D Systems, Inc.
31