3D Systems ProJet 4500 User Manual page 30

Grouping:
After parts are positioned, a greybox will frame the parts to indi-
cate that they are grouped.
Moving manually/translating the part: Parts can be manually
moved if the default position is not ideal for your needs.
• Mouse option – drag and place in top and side views.
You cannot move a part in the isometric view.
• Translate – move based on position
• Justify – front/back, left right, bottom
• Rotate – x,y,z are axes of rotation.
NOTE: Bounding boxes can intersect as long the actual 3D model
does not touch.
Rotating a Part: Parts being prepared for a build can be rotated
and scaled to suit your needs. Primarily, a part will be opened and
prepared in a default setting.
• To rotate a part, select the part and choose Transform
> Rotate. In the Rotate dialog, specify the plane and
degree of rotation, and click OK.
• To keep a group of parts in the same relative orientation,
rotate the parts as a group. Select each part and then
choose Transform >
3D Systems, Inc.
Rotate.
30