INSTALL 3DPRINT
® 1.04
If 3DPrint
has not been installed, you will first need to install it. Installation instructions are available in the 3DPrint Software User Manual.
®
Be sure to install the software on the same computer that is connected to your 3D Printer. Also be sure you use the version of 3DPrint
that came with your ProJet
If you encounter any problems during installation, please contact your local Service Provider or Reseller, or visit the Support section of
our Web site at 3dscentral.3dsystems.com.
Please refer to 3DPrint
®
IMPORTANT:
To avoid problems that may occur during printing, ensure that all screen savers and your power management software
are turned off on the computer driving your 3D Printer. Most screen savers and power management software can be turned off in the
main Windows screen settings. For additional instructions on how to disable your hardware and software power management, please
consult your computer hardware Owner's Manual.Also allow 3D Print through Windows Firewall.
NOTE: You must have Administrator rights to install 3DPrint
If you encounter any problems during 3DPrint
site: 3dscentral.3dsystems.com.
Close all running applications and insert the 3DPrint
1
media (a USB thumb drive) into your computer.
If the installer does not automatically start, double-click on your
2
drive icon. Double-click on the Setup.exe icon. This starts the
3DPrint
installation.
®
3D Systems, Inc.
4500 system.
®
Software User Manual for further information.
installation, please contact your local Reseller, or visit the support section of our Web
®
correctly.
®
Installation
®
21
®