5 Functionality
5.2.8 Transmitted data in 2D&3D mode
The transmitted image in 2D&3D mode is shown in Fig. 5.10. The data is transmitted in the
following order:
•
Raw image
•
3D data
Resulting height in 2D&3D mode is:
Hres = Peak0_3DH + 4 (if DataFormat3D=3 or 4), or
Hres = Peak0_3DH + 2 (if DataFormat3D=2)
0
P e a k 0 _ 3 D H
3 D d a t a r o w s
3 D d a t a r o w s : 2 ( D a t a F o r m a t 3 D = 2 ) o r 4 ( D a t a F o r m a t 3 D = 0 o r 1 )
Figure 5.10: Transmitted image in 2D&3D mode
5.2.9 Transmitted data in 3Donly mode
In 3Donly mode only the 3D data is transmitted. The FrameCombine feature (see Section
5.2.10) was added to lower the transmitted frame rate. For FrameCombine = f, the data for f
images are combined into one image.
Resulting height in 3Donly mode is therefore:
Hres = 4 (if DataFormat3D=3 or 4), or
Hres = 2 (if DataFormat3D=2)
0
3 D d a t a r o w s
3 D d a t a r o w s : 2 ( D a t a F o r m a t 3 D = 2 ) o r 4 ( D a t a F o r m a t 3 D = 0 o r 1 )
Figure 5.11: Transmitted image in 3Donly mode
.
42 of 117
W
R a w i m a g e
3 D d a t a
S c a n a r e a f o r p e a k 1
W
3 D d a t a
MAN073 12/2016 V1.0