Custom Engineering KPM150H User Manual page 75

SENSORS
1
Disconnect the power supply cable.
2
ATTENTION:
Do not touch the head heating line with bare hands or
metal objects.
Do not perform any operation inside the printer immedi-
ately after printing because the head and motor tend to
become very hot.
Open the printer cover
to the vertical up position.
3
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
Alcohol, solvent cohol, solve
Clean the printer sensors
by using compressed air.
User manual
6. MAINTENANCE
ON
KPM150H-AERO 75