Lenovo x3250 m6 Installation And Service Manual page 153

Figure 76. 2.5-inch simple-swap hard-disk-drive backplate assembly removal
Installing the 2.5-inch simple-swap hard-disk-drive backplate assembly
There are three types of 2.5-inch simple-swap hard-disk-drive backplate assemblies. In the following
illustrations, type a and b are for server models with RAID adapters and type c is for server models with
onboard software RAID configuration.
Figure 77. 2.5-inch simple-swap hard-disk-drive backplate assemblies
1
Power connector
2 Mini-SAS signal connector
To install the 2.5-inch simple-swap hard-disk-drive backplate assembly, do the following:
Step 1. Align the backplate assembly with the backplate assembly alignment slots in the chassis. Then,
carefully lower the backplate assembly into the chassis until it is seated firmly.
.
Chapter 7 Removing and installing server components
139