Configuring Onboard Sata Software Raid; Enabling The Onboard Sata Raid Functionality; Creating Raid Volumes - Lenovo x3250 m6 Installation And Service Manual

imm_external_ip
The external IMM2 LAN IP address. There is no default value. This parameter is required.
imm_user_id
The IMM2 account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM2 account password (1 of 12 accounts). The default value is PASSW0RD (with
a zero 0 not an O).
Examples that do use the user ID and password default values:
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> –host <imm_ip>
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> –host <imm_ip>
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> –host <imm_ip>
• Bootable media:
You can also build a bootable medium using the applications available through the ToolsCenter
Web site at https://support.lenovo.com/us/en/documents/LNVO-CENTER. From the
ToolsCenter page, scroll down for the available tools.
Step 5. Restart the server.

Configuring onboard SATA software RAID

You can configure onboard SATA software RAID by enabling the onboard SATA RAID functionality, creating
RAID volumes, deleting RAID volumes, and marking disks as spare.

Enabling the onboard SATA RAID functionality

Note: Use the arrow keys on the keyboard to make selections.
To enable onboard SATA RAID functionality, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 29.
2. Select System settings ➙ Devices and I/O prots.
3. Select Onboard SATA mode and press Enter.
4. Select RAID and press Enter.
5. Press ESC twice to return to the main menu of the Setup Utility program.
6. Select Save Settings and press Enter.
7. Exit the Setup Utility program.

Creating RAID volumes

This section describes how to use the Intel Rapid Storage Technology enterprise UEFI HII to create RAID
volumes.
To create RAID volumes, do the following:
1. Start the Setup Utility program. See "Starting the Setup Utility program" on page 29.
2. Select System settings ➙ Storage and press Enter.
3. Select Intel RSTe SATA Controller and press Enter.
4. Select Create RAID Volume and press Enter.
5. Type a proper RAID volume name in the Name field and press Enter.
6. Use the arrow keys to select a RAID level in the RAID Level field and press Enter.
7. Use the arrow keys to select a hard disk drive in the Select Disk field and press Enter.
44
Lenovo System x3250 M6 Installation and Service Guide