Air Cleaner - Sym PA12B Service Manual

Air Cleaner

Remove the air filter cover
(Screw x 5, bolt x 1)
Remove the air filter element.
Remove the air filter holding plate and take
out the air filter element. (Screw×1)。
Wash the air filter element with non-flammable
or high flash-point solvent. (Like kerosene or
diesel)
After washing, squeeze it and dump into motor
oil, and squeeze again.
Install the holding plate and the air filter cover
If the element is too dirty or damaged, please
change a new one.
Caution
Don't use gasoline or other flammable
solvents to clean the element.
Installation
Install as reverse order of removal.。
To this chapter contents
Bolt×1
Air filter
element
Screw×1
Dump Engine Oil
3、Fuel System
Cleanse
Screw ×5
Squeeze
Squeeze
3-13