Steering Stem - Sym PA12B Service Manual

11. Steering / Front Wheel / Front Fork

Steering Stem

Removal
Remove the meter, headlight, steering
handlebar, front wheel, front brake and front
fork.
Remove the top bridge.
Remove the steering stem locknut and
steering upper cone race.
Special tool：
Stem locknut socket wrench SYM-5320000
Remove the steering stem.
Caution
Keep the steering steel balls in a
container to avoid missing them.
Remove the steering upper / bottom ball race
by driver and rubber hammer.
Remove the steering bottom cone race from
the steering stem.
Caution
Do not do any damage to the frame and
steering stem.
Installation
Install a new steering bottom cone race onto
the steering stem and lubricate with grease.
Install the steering upper / bottom ball race to
the right position.
Caution
Do not let the ball race lean on one side
during installation.
Coat the upper / bottom ball race with grease
and install the steering balls.
11-20
To this chapter contents
Top bridge locknut
Steering stem thread
Bottom cone race
Steering stem thread
Upper cone race
Upper ball race
Button ball race