Cylinder Head - Sym PA12B Service Manual

7. Cylinder Head / Valve

Cylinder Head

Cylinder Head Removal
Remove engine. (Refer to chapter 6)
Remove the AI tube on the left side of the
engine (bolt×4)
Remove the cylinder head cap with the
cylinder head cap wrench
Special Tool：
Cylinder head cap wrench
SY-ALL12361
Remove the cylinder head side cover
(bolt×2)。
Disassemble the timing-inspecting hole cap,
and the ACG cap. Match the TDC mark "T"
Loosen the cam-chain adjuster bolt
7-4
To this chapter contents
bolt×4
Cylinder
head cap
bolt×2
Adjust bolt
Holding
nut