Sym PA12B Service Manual page 61

3. Fuel System
Slightly pull the fuel tank back toward the
tail of the bike. This will help the fuel tank to
separate from the frame.
Disassemble the fuel gauge coupler.
Remove the fuel tank.
Caution
If the fuel tank is broken or leaking,
please change a new one immediately.
Fuel amount warning sensor/ Fuel
gauge disassembly.
Remove the protective cover of fuel amount
warning sensor or Fuel gauge sensor.
Remove the holding screws (screw ×4)
Take out the fuel amount warning sensor or
fuel gauge sensor.
Please refer to the 13
detailed inspection for the gauges.
3-12
To this chapter contents
th
chapter for the
Sensor cover
Screw ×4
Fuel gauge coupler