Sym PA12B Service Manual page 78

Install the clutch spring, lifter plate, and tighten
the holding bolts. (Bolt X 4)
Install the lifter rod.
Install the centrifugal oil strainer
Assemble the right crankcase cover.
(Bolt X 11)
Connect the clutch cable
Install the Kick-starter, kick-starter lever, and
exhaust pipe.
Fill in specified engine oil.
Turn the adjustment nut to optimize the clutch
free play.
Free play：10~20mm
After achieving the correct free play, tighten
the adjusting nut and the lock nut.
To this chapter contents
4 、 Lubrication / Clutch / Transmission
Lifter rod
Adjusting nut
Oil strainer
10~20mm
Lock nut
Decrease free play
Increase the
free play
Bolt×4
4-15