13. Electrical System
Starting System
Starting circuit
Fuse (15A)
R
Battery
Starter relay inspection
Turn the main switch.
Pull the brake lever and press the starter
switch.
If a sound of "Looh Looh" is heard, it indicates
the relay function normally.
Remove the left side cover.
Disconnect the negative terminal wire.
Disconnect the starter relay coupler.
Connect an ohmmeter to the starter relay
terminal.
Connect the yellow / red wire to the battery
positive terminal and the green / yellow wire to
the battery negative terminal.
Check the continuity of the starter relay
terminal.
If there is no continuity, replace the relay.
13-14
To this chapter contents
R
Main switch
B
R
Neutral lamp
LG / R
Neutral switch
Starter switch
矽控整流器
G / R
Clutch switch
G / 紅
G
Y / R
Starter
relay
Starter
motor
Starter relay
Y / R
G / R