Sym PA12B Service Manual page 211

13. Electrical System
Replace the headlight bulb if necessary.
Specification：
Headlight bulb 12V 35W/35W
Headlight installation
Install in the reverse order of removal.
Connect the headlight coupler.
Alight the headlight set with the headlight lens.
Tighten the lock screw.
Make sure the headlight work properly.
Adjust the headlight beam.
Headlight beam adjustment
Loosen the headlight lock bolt and move the
headlight up and down to adjust headlight
beam.
Tighten the lock bolt after adjustment.
Caution
Do not adjust the headlight beam except
for necessity.
Improper headlight beam adjustment
dazzles the coming driver / rider or results
in insufficient illumination.
13-18
To this chapter contents
Screw×1
Headlight coupler
Bolt×2