3. Fuel System
Carburetor Removal
Removal
Turn the fuel cock switch to the S position ( If
the fuel cock is vacuum type, it won't be
necessary)
Put a container near the fuel drain screw, and
loosen it. Drain all the fuel of the float
chamber
Warning
Gasoline should stay away from fire, and
avoid getting on the frame. If gasoline
gets on the frame, please wash it off
immediately.
Loosen the choke wire clamp screw, and
remove the choke wire.
Remove the carburetor top cover by turning it
counterclockwise. Remove the top cover,
throttle cable, and throttle valve.
3-4
To this chapter contents
Manual fuel
cock
Throttle valve
Automatic Fuel
cock (Vacuum)
Fuel drain screw
Choke wire clamp screw
Top cover