4 、 Lubrication / Clutch / Transmission
Match the driven shaft indent with the inner
rotor indents, and assemble the driven shaft.
Make sure that oil pump shaft can be rotated
freely. Then assemble the driven gear.
Caution
Make sure that oil pump can rotate
smoothly.
Install the oil pump gear protective cover.
(Bolt×2)
Torque value:0.4~0.6kgf-m
Install the centrifugal oil strainer, and tighten
the anti-loosen nut.
Torque value:5.0~6.0kgf-m
Special tool:
Centrifugal oil strainer special nut socket:
SYM-9023100-SY125
Install the centrifugal oil strainer cover.
(screw×3)。
Torque Value:0.3~0.4kgf-m
4-10
To this chapter contents
Driven shaft
Bolts×2
Anti-loosen nut
Screw×3