Table of Contents
Advertisement
... FOR THE MAIN FUNCTIONS
• • • • • If you want to abort the transmission in
progress, press the
document is being unloaded I will auto-
matically print the transmission report .
• • • • • If the volume of the tones emitted by
the correspondent's facsimile machine
seems too low or too high , regulate it
using the
VOL.+
tively.
Special dialling conditions
Under the conditions that follow, modify the pro-
cedure for dialling the number described in step
5.
1
I am connected to a private line
• • • • • Access the public line following the pro-
cedure required by your exchange: nu-
meric code or (in some countries only)
pulse ( EARTH or FLASH ) obtained by
pressing the
EXT/R
• • • • • Dial your correspondent's number:
0 2 3 9 6 7 4 8
2
Your correspondent uses tone dialling
(multifrequency)
If I am set for pulse dialling (see "To change
the dial mode") and you have to send a
document to a correspondent that uses tone
dialling:
• • • • • Change your dial mode temporarily be-
fore dialling the number:
0 0 8 8 6 3 * _
• • • • • Dial your correspondent's number:
0 0 8 8 6 3 * 9 8 3 5 _
NOTE
Once I have finished sending the document
I always restore the dial mode for which I
was set.
key: while the
STOP
and
keys, respec-
VOL.-
key.
3
Your correspondent does not answer
If your correspondent is busy, you can recall
him without having to dial the number again.
I always store the last number dialled and
you can redial it simply by pressing the rel-
evant key:
NOTE
I also offer abbreviated dialling procedures,
called speed dialling and one-touch dial-
ling , for which I must be programmed as
described in the section entitled "How to
program me".
If I can't send the document
1
Sometimes, due to errors on the line such
as excessively intense traffic or other kinds
of interference, the document sent is received
incorrectly by your correspondent's machine,
which requests you to resend it.
In these cases, it is advisable to resend the
document at a slower speed . I normally
send documents at a speed of 9600 bps ( b its
p er s econd), which you can halve ( 4800 bps )
after following steps 1, 2 and 3 of the ordi-
nary transmission procedure.
3a
5
3b
3c
or
3d
- 18 -
0 2 3 9 6 7 4 8
SEND HALF SPEED
ON
/OFF
ON
/OFF
NORMAL
STANDARD
Advertisement
Table of Contents
