Olivetti OFX 120 Instructions Manual page 22

Table of Contents

Advertisement

1
Make sure that I'm in stand-by mode:
0 7-FEB
2
DOCUMENT FEEDING
NORMAL
3
Set the contrast and resolution in the same
way as for making a copy. If the document to be
sent is a normal text, leave the STANDARD reso-
lution setting.
4
Engage the line:
or
The IN USE LED lights up.
5
Dial the number to select the correspondent to
whom you want to send your document (you can
dial an unlimited number of digits):
0 2 3 9 6 7 4 8 _
• • • • •
if your correspondent's facsimile machine is
set for automatic reception , you will hear
the facsimile answering tone
• • • • •
if it is set for manual reception , your corre-
spondent will answer and you must ask him
to press the start key on his facsimile ma-
chine, and then wait for the facsimile tone .
NOTE
If I am connected to a private line or the cor-
respondent uses tone dialling (multifre-
quency), see the section entitled "Special
dialling conditions".
1 4 : 2 5
STANDARD
TEL. MODE
- 17 -
... FOR THE MAIN FUNCTIONS
6
As soon as a connection has been established
with your correspondent, his or her number ap-
pears on my display:
0 2 3 9 6 7 4 8
followed by the transmission features:
T X NORM STD P 0 0 1
where P001 indicates the number of the page
I'm sending.
NOTE
Your correspondent's number may not cor-
respond to the number you dialled (if the
correspondent did not set his fax number
correctly) or may not even be displayed at
all (if the correspondent did not set his fax
number).
7
If you engaged the line by lifting the handset,
hang it up:
T X NORM STD P 0 0 1
8
Once I have sent the document, I emit five short
beeps (lasting a total of about 5 seconds ): dur-
ing which time you can insert another document
to be sent. If you do not, I return automatically to
stand-by mode.
NOTE
• • • • • Once I have sent the document, I always
restore the initial contrast and resolution
settings to NORMAL and STANDARD,
respectively.
In addition, if you have enabled me to do
so (as explained in the previous section),
I print the transmission report , an ex-
planation of which is provided later on in
this manual.
TRANSMITTING

Advertisement

Table of Contents
loading

Table of Contents