How To Set Me Up; The Console In Set-Up Mode - Olivetti OFX 120 Instructions Manual

HOW TO SET ME UP ...

HOW TO SET ME UP...
I only need a few setup parameters, nearly all of
which are already set, in order to work properly.
All you have to do is set
your name
(though this is not strictly necessary) and
your telephone number
which identifies me as a subscriber to the tel-
ephone service.
If you like, you can change the default values
of the other parameters to suit them to your op-
erating requirements.

THE CONSOLE IN SET-UP MODE

1 2
4 5
8
7
0
P T
1 Number Keys
F To enter any numeric or alphabetical data.
3 SPEED DIAL Key
F To change the type of character associ-
ated with the number keys: capitals, small
letters or digits.
→
2 4 5
SPEED DIAL
3 +
REDIAL VOL.
-
6
PAUSE 01
9
EXT/R 02 02
HOOK 03
#
15
- 4 -
All parameters are set using the console. This
section only describes the keys you will need
to set me up (those marked with the larger num-
bers).
Some keys perform different functions accord-
ing to the operating mode I am in:
S stand-by mode, that is, when I'm rest-
ing.
F set-up mode, that is, after the
key has been pressed
A complete description of the console is provided
in the appendix at the end of this manual.
6
FUNCTION CONTR.
16
7 FUNCTION Key
S To enter set-up mode.
F To select menus and parameters.
8 CONTR. Key
F To move backwards to digits and charac-
ters when entering numbers and names.
FUNCTION
12
FAX.
RESOL. RX MODE
TAD
IN USE ERROR
18 20