Installing The Keyboard Control Board; Removing The Power Connector - Dell Latitude 12 Rugged Extreme 7214 Owner's Manual

Installing the keyboard control board

1. Align the keyboard control board with the slot on the computer.
2. Tighten the screws that secure the keyboard control board to the computer chassis.
3. Install the:
a. system board
b. SIM board
c. WWAN card
d. WLAN card
e. antenna routing bracket
f. card bracket
g. GPS module
h. ExpressCard
i. heatsink
j. memory module
k. docking board
l. hard drive
m. keyboard
n. base cover
o. battery
4. Follow the procedure in

Removing the power connector

1. Follow the procedures in
2. Remove:
48
After working inside your
Before Working Inside Your Computer
computer.