Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Topics:
•
Recommended tools
•
Screw list
•
Subscriber Identity Module (SIM) card
•
Micro Secure Digital (SD) Card
•
Base cover
•
WLAN card
•
WWAN card
•
Solid-state drive
•
Memory modules
•
Battery
•
Battery cable
•
Assembly inner frame
•
LED board
•
System fan
•
Heat sink
•
Speakers
•
System board
•
Power-button board
•
Smart card reader
•
Keyboard assembly
•
Keyboard bracket
•
Display assembly
•
Display bezel
•
Display panel
•
Camera/microphone module
•
eDP/display cable
•
Sensor board
•
Display hinges
•
Display back cover
•
Dummy SIM-card slot filler
•
Palm-rest assembly
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
16
Removing and installing components
3