4.
Affix the tape that secures the heatsink assembly.
5.
Route the antenna cable and connect it to the connector on the WLAN card.
6.
Affix the tape that secures antenna cable.
7.
Install:
a.
docking board
b.
base cover
c.
battery
8.
Follow the procedures in
Removing the coin cell battery
1.
Follow the procedures in
2.
Remove:
a.
battery
b.
base cover
3.
To remove the coin cell battery:
a. Disconnect the coin cell battery cable from the system board [1].
b. Lift and remove the coin cell battery from the computer chassis [2].
Installing the coin cell battery
1.
Connect the coin cell battery to the system board connector.
2.
Insert the coin cell battery in the slot on the computer chassis.
3.
Install:
a.
base cover
b.
battery
4.
Follow the procedures in
34
After Working Inside Your
Before Working Inside Your
After Working Inside Your
Computer.
Computer.
computer.