Removing And Installing Components; Opening The Press Latch Doors; Closing The Press Latch Doors; Removing The Battery - Dell Latitude 12 Rugged Extreme Getting Started Manual

Table of Contents

Advertisement

Removing and installing components

This section provides detailed information on how to remove or install the components from your
computer.

Opening the press latch doors

The computer includes six press latch doors:
Three on the back of the computer
Two on the right side of the computer
One on the left side of the computer
1.
Slide the latch until the unlock icon is visible.
2.
Press the latch and open the press latch door in the downward direction.

Closing the press latch doors

1.
Close the latch door back by pressing it toward the computer.
2.
To lock the latch doors, slide the latch until the lock icon is visible.

Removing the battery

WARNING: Using an incompatible battery may increase the risk of fire or explosion. Replace the
battery only with a compatible battery purchased from Dell. The battery is designed to work with
your Dell computer. Do not use a battery from other computers with your computer.
WARNING: Before removing or replacing the battery:
1.
Turn off the computer.
2.
Disconnect the AC adapter from the electrical outlet and the computer.
3.
Disconnect the modem from the wall connector and computer.
4.
Remove any other external cables from the computer.
WARNING: To prevent ignition in a hazardous atmosphere, batteries must only be removed,
changed or charged in an area known to be non-hazardous.
10
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

7214P18t

Table of Contents