Installing The Stylus And Tether; Removing The Battery; Installing The Battery - Dell Latitude 12 Rugged Extreme 7214 Owner's Manual

Installing the stylus and tether

1. Insert the tether into the slot on the computer
2. Insert the stylus into its slot and push it inwards.
3. Follow the procedures in

Removing the battery

WARNING: Using an incompatible battery may increase the risk of fire or explosion. Replace the
battery only with a compatible battery purchased from Dell. The battery is designed to work with
your Dell computer. Do not use a battery from other computers with your computer.
WARNING: To prevent ignition in a hazardous atmosphere, batteries must only be changed or
charged in an area known to be non-hazardous.
1. Follow the procedures in
2. To remove the battery:
a. Push the battery latch towards the back of the computer [1].
b. Slide the latch to release the battery [2].
c. Slide and lift the battery out of the computer [3].

Installing the battery

1. Slide the battery into the battery bay.
2. Slide the latch to lock position.
3. Follow the procedures in
After Working Inside Your
Before Working Inside Your
After Working Inside Your
computer.
Computer.
computer.
19