Installing The Docking Board; Removing The Antenna Routing Bracket - Dell Latitude 12 Rugged Extreme 7214 Owner's Manual

Installing the docking board

1. Connect the docking board connector cable to the system board.
2. Flip the docking board and place it on the slot.
3. Tighten the screws that secure the docking board.
4. Connect the antenna cables to the docking board.
5. Install:
a. base cover
b. battery
6. Follow the procedures in

Removing the antenna routing bracket

1. Follow the procedures in
2. Remove:
a. battery
b. base cover
3. To remove the antenna routing bracket:
a. Disconnect all the wireless antenna cables from the connectors [1].
b. Unroute the antenna cables from the routing channel [2].
c. Remove the screws that secure the bracket [3].
d. Lift and remove the antenna routing bracket from the computer chassis [4].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
29