Installing the antenna routing bracket
1.
Place the antenna routing bracket in the slot on the computer chassis.
2.
Tighten the screws that secure the cable holder.
3.
Route the antenna cables into the routing channels.
4.
Connect all the wireless antenna cables to the connectors.
5.
Affix the tape that secures the wireless antenna cables.
6.
Install:
a.
base cover
b.
battery
7.
Follow the procedures in
Removing the WLAN card
1.
Follow the procedures in
2.
Remove:
a.
battery
b.
base cover
c.
antenna routing bracket
3.
Disconnect the antenna cables from the WLAN card.
4.
To remove the WLAN card:
a. Remove the screw that secures the WLAN card [1].
b. Slide and lift the WLAN card from the slot [2].
30
After Working Inside Your
Before Working Inside Your
Computer.
Computer.