Installing The Global Positioning System (Gps) Module; Removing The Fingerprint Reader - Dell Latitude 12 Rugged Extreme 7214 Owner's Manual

Installing the Global Positioning System (GPS) module

1. Insert the GPS module into its slot and press the latch to secure it.
2. Connect the cable to the connector on the GPS module.
3. Connect the antenna cable to the GPS module
4. Affix the tape that secures the antenna cable.
5. Connect the USH cable to the connector on the GPS module.
6. Install:
a. base cover
b. battery
7. Follow the procedures in

Removing the fingerprint reader

1. Follow the procedure in
2. Remove the:
a. battery
3. To remove the fingerprint reader:
a. Remove the screws that secure the cover [1].
b. Slide and lift the cover to expose the fingerprint reader board [2, 3].
c. Disconnect the cable from the fingerprint reader board [4].
26
After Working Inside Your
Before Working Inside Your
Computer.
Computer.