Installing The Display Assembly - Dell Latitude 12 Rugged Extreme 7214 Owner's Manual

e. WLAN card
f. WWAN card
g. heatsink
h. display cable
3. To remove the hinges:
a. Remove the screws that secure the display hinge cover [1].
b. Lift and remove the display hinge cover [2].
c. Lift and pull the rubber gasket to release the cables routed through the gasket [3].
d. Remove the screws that secure the display hinges [4].
e. Flip the computer chassis [5].
4. To remove the display assembly:
a. Unlock the display [1].
b. Lift the display to remove it from the computer chassis [2].

Installing the display assembly

1. Install the display assembly and close the display.
2. Flip the computer chassis.
3. Install the display hinges in their slots.
4. Tighten the screws that secure the hinges.
5. Route the cables through the rubber gasket.
6. Install the hinge cover.
7. Tighten the screws that secure the hinge cover.
41