Installing the fingerprint reader
1.
Insert the fingerprint reader board into the slot on the computer.
2.
Connect the fingerprint reader board cable to the connector.
3.
Secure the cover to fingerprint reader board by using the screws.
4.
Install the:
a.
battery
5.
Follow the procedure in
Removing the power button board
1.
Follow the procedure in
2.
Remove the:
a.
battery
3.
To remove the power button board:
a. Remove the screws that secure the cover [1].
b. Slide and lift the cover to access the power button board [2, 3].
c. Remove the screws that secure the power button board [4].
d. Slide and lift the power button board [5].
e. Disconnect the cable from the power button board [6].
After working inside your
Before Working Inside Your
computer.
Computer.
27