Vlans And Port Vlan Id Numbers; Vlan Numbers; Pvid Numbers - IBM RackSwitch G8000 Application Manual

VLANs and Port VLAN ID Numbers

VLAN Numbers

PVID Numbers

94
RackSwitch G8000: Application Guide
The G8000 supports up to 1024 VLANs per switch. Even though the maximum
number of VLANs supported at any given time is 1024, each can be identified with
any number between 1 and 4094. VLAN 1 is the default VLAN for the data ports.
Use the following command to view VLAN information:
RS G8000)# show vlan
VLAN Name
---- ------------------------
1 Default VLAN
2 VLAN 2
Each port in the switch has a configurable default VLAN number, known as its PVID.
By default, the PVID for all non-management ports is set to 1, which correlates to
the default VLAN ID. The PVID for each port can be configured to any VLAN
number between 1 and 4094.
Use the following command to view PVIDs:
RS G8000# show interface information
Port Tag Type
---- --- ---------- ---- --- --- ----- ------------ -------------------
1 n External
2 n External
3 n External
4 n External
5 n External
6 n External
...
* = PVID is tagged.
Use the following command to set the port PVID:
RS G8000(config)# interface port <port number>
RS G8000(config-if)# pvid <PVID number>
Each port on the switch can belong to one or more VLANs, and each VLAN can
have any number of switch ports in its membership. Any port that belongs to multiple
VLANs, however, must have VLAN tagging enabled (see
page 95).
Status
------ -------------------------
ena
dis
RMON Lrn Fld PVID
d e e 1
d e e 1
d e e 1
d e e 1
d e e 1
d e e 1
Ports
1-48, XGE1-XGE4
empty
NAME VLAN(s)
1
1
1
1
1
1
"VLAN Tagging" on