Switch Images And Configuration Files - IBM RackSwitch G8000 Application Manual

Switch Images and Configuration Files

© Copyright IBM Corp. 2011
This section describes how to use MIB calls to work with switch images and
configuration files. You can use a standard SNMP tool to perform the actions, using
the MIBs listed in Table
Table 26 lists the MIBS used to perform operations associated with the Switch
Image and Configuration files.
Table 26. MIBs for Switch Image and Configuration Files
MIB Name
agTransferServer
agTransferImage
agTransferImageFileName
agTransferCfgFileName
agTransferDumpFileName
agTransferAction
agTransferLastActionStatus
agTransferUserName
agTransferPassword
agTransferTSDumpFileName
The following SNMP actions can be performed using the MIBs listed in
• Load a new Switch image (boot or running) from a FTP/TFTP server
• Load a previously saved switch configuration from a FTP/TFTP server
• Save the switch configuration to a FTP/TFTP server
• Save a switch dump to a FTP/TFTP server
26.
MIB OID
1.3.6.1.4.1872.2.5.1.1.7.1.0
1.3.6.1.4.1872.2.5.1.1.7.2.0
1.3.6.1.4.1872.2.5.1.1.7.3.0
1.3.6.1.4.1872.2.5.1.1.7.4.0
1.3.6.1.4.1872.2.5.1.1.7.5.0
1.3.6.1.4.1872.2.5.1.1.7.6.0
1.3.6.1.4.1872.2.5.1.1.7.7.0
1.3.6.1.4.1872.2.5.1.1.7.9.0
1.3.6.1.4.1.1872.2.5.1.1.7.10.0
1.3.6.1.4.1.1872.2.5.1.1.7.11.0
Chapter 27. Simple Network Management Protocol
Table 26.
327