IBM RackSwitch G8000 Application Manual page 274
A top-of-rack (tor) switch
Hide thumbs
Also See for RackSwitch G8000:
- Manual (18 pages) ,
- Manual (14 pages) ,
- Installation manual (86 pages)
Table of Contents
Advertisement
272
RackSwitch G8000: Application Guide
4. Define the stub area.
RS G8000(config-router-ospf)# area 1 area-id 0.0.0.1
RS G8000(config-router-ospf)# area 1 type stub
RS G8000(config-router-ospf)# area 1 enable
RS G8000(config-router-ospf)# exit
5. Attach the network interface to the backbone.
RS G8000(config)# interface ip 1
RS G8000(config-ip-if)# ip ospf area 0
RS G8000(config-ip-if)# ip ospf enable
RS G8000(config-ip-if)# exit
6. Attach the network interface to the stub area.
RS G8000(config)# interface ip 2
RS G8000(config-ip-if)# ip ospf area 1
RS G8000(config-ip-if)# ip ospf enable
RS G8000(config-ip-if)# exit
Advertisement
Table of Contents
Troubleshooting
