IBM RackSwitch G8000 Application Manual page 112

110
RackSwitch G8000: Application Guide
4. Examine the trunking information on each switch.
# show portchannel information
PortChannel 3: Enabled
port state:
2: STG 1 forwarding
9: STG 1 forwarding
16: STG 1 forwarding
Information about each port in each configured trunk group is displayed. Make
sure that trunk groups consist of the expected ports and that each port is in the
expected state.
The following restrictions apply:
• Any physical switch port can belong to only one trunk group.
• Up to 8 ports can belong to the same trunk group.
• All ports in static trunks must be have the same link configuration (speed, duplex,
flow control).
• Trunking from third-party devices must comply with Cisco
technology.
® ®
EtherChannel