IBM RackSwitch G8000 Application Manual page 72

70
RackSwitch G8000: Application Guide
Configuring LDAP Authentication on the Switch
1. Turn LDAP authentication on, then configure the IPv4 addresses of the Primary
and Secondary LDAP servers.
>> # ldap-server enable
>> # ldap-server primary-host 10.10.1.1
>> # ldap-server secondary-host 10.10.1.2
2. Configure the domain name.
>> # ldap-server domain <ou=people,dc=my-domain,dc=com>
3. You may change the default TCP port number used to listen to LDAP (optional).
The well-known port for LDAP is 389.
>> # ldap-server port <1-65000>
4. Configure the number of retry attempts for contacting the LDAP server, and the
timeout period.
>> # ldap-server retransmit 3
>> # ldap-server timeout 10