About this guide
This guide describes the SmartNode 4400 Series IpChannel Bank hardware, installation and basic configura-
tion. For detailed software configuration information refer to the SmartWare Software Configuration Guide and
the available Configuration Notes.
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters and appendices:
•
Chapter 1,
"General information"
•
Chapter 2,
"Applications overview"
and applications
•
Chapter 3,
"Hardware installation"
•
Chapter 4,
"Getting started with the SmartNode 4400 Series"
SmartNode IpChannel Bank
•
Chapter 5,
"Contacting Patton for assistance"
nical support for assistance
•
Appendix A,
"Compliance information"
•
Appendix B,
"Specifications"
•
Appendix C,
"Port pin-outs"
•
Appendix D,
"Factory Configuration"
4400 Series devices
•
Appendix E,
"End user license agreement"
•
Appendix F,
"Installation checklist"
Channel Bank
For best results, read the contents of this guide before you install the IpChannel Bank.
on page 14 provides information about router features and capabilities
on page 20 contains an overview describing router operation
on page 23 provides quick start hardware installation procedures
on page 44 contains information on contacting Patton tech-
on page 47 contains compliance information for the SmartNode
on page 49 contains for the specifications for the IpChannel Bank
on page 55 provides cable pinouts for the various interface ports
on page 61 lists the factory configuration settings for the SmartNode
on page 63 provides detailed information on the EULA
on page 66 lists the tasks for installing the SmartNode 4400 IP
on page 34 describes getting started with the
9