About this guide
This guide describes installing and configuring a Patton Electronics Model 3224 IpDSLAM. By the time you
are finished with this guide, your IpDSLAM will be installed. The instructions in this guide are based on the
following assumptions:
•
The IpDSLAM will connect to an uplink network
•
There is a LAN connected to one of the Ethernet ports of the IpDSLAM
•
Subscribers will be connected to remote G.SHDSL modems
Audience
This guide is intended for the following users:
•
Operators
•
Installers
•
Maintenance technicians
Structure
This guide contains the following chapters:
•
Chapter 1 describes the IpDSLAM
•
Chapter 2 describes installing the IpDSLAM hardware
•
Chapter 3 describes configuring the IpDSLAM for use
•
Chapter 4 details how to power up and deactivate the IpDSLAM
•
Chapter 5 contains troubleshooting and maintenance information
•
Chapter 6 contains information on contacting Patton technical support for assistance
For best results, read the contents of this guide before you install the IpDSLAM.
5