Supplementary Service Keys; Bellcore Standard Ring Cadence Patterns - Patton electronics SL4020 User Manual

SmartLink 4020 User Manual
Timeval ::= time in milliseconds
Repeatval ::= # of cycles to repeat
Tonename ::= "RING_0" | "RING_1" | "RING_2" | "RING_3" | "RING_4"
| "RING_5" | "RING_6" | "RING_7" | "RING_8" | "RING_9"
Idle ::= "IDLE"
Active ::= "ON" | "OFF"
Inactive ::= Idle "(" Timeval ")"
Active ::= Active "(" Timeval ")"
Sequence ::= Active | Active "," Sequence
Repetition ::= "[" Sequence "]" Repeatval
Repeat ::= "R"
Cycle ::= Sequence | Repetition
Fullsequence ::= Cycle | Cycle "," Fullsequence
Cadence ::= Fullsequence | Fullsequence "," Repeat | Fullsequence
"," Inactive "," Repeat
Ring ::= Cadence
Note
The Bellcore standard ring cadence patterns are shown in
Name
RING_0
RING_1
RING_2
RING_3
RING_4
RING_5

Supplementary Service Keys

Supplementary Service Keys are key sequences that can enable and disable certain calling features from an analog
phone handset attached to the SmartLink 4020.
Note The supplementary service keys must begin with a '*','#' character, or f (flash
hook) and follow a 1 or 2 numeric digit(s).
Localization
Table 2. Bellcore standard ring cadence patterns
ON(2000), IDLE(4000), R
ON(800), OFF(400), ON(800), IDLE(4000), R
ON(400),OFF(200)]2,ON(800),IDLE(4000),R
ON(300), OFF(200), ON(1000), OFF(200), ON(300), IDLE(4000), R
ON(500)
table 2.
Value
7 • System
70