Mtu Size; Mtu (Maximum Transfer Unit) Size; Wan Vlan Configuration; Wan Vlan Tag (Ieee 802.1Q) - Patton electronics SL4020 User Manual

Analog voip soho router

Hide thumbs Also See for SL4020:

Table of Contents

SmartLink 4020 User Manual

MTU Size

The size limit (bytes) of the packet for all outgoing packets.

The SmartLink 4020 can mark outgoing Ethernet frames on the WAN interface with VLAN and priority tags.

Other devices on the LAN can use the tags to control how frames from the SmartLink 4020 are processed. All

data leaving the SmartLink 4020 will be marked with the specific value unless overridden on the telephony

VLAN configuration settings.

Figure 11. WAN VLAN Configuration section of the Settings window

VLAN Tag (IEEE 802.1q)

WAN

IEEE 802.1q Ethernet VLAN tag for all outgoing packets on WAN Ethernet interface. The value should be

between 0 and 4094.

Priority Tag (IEEE 802.1q)

WAN

IEEE 802.1q Ethernet Priority tag for all outgoing packets on WAN Ethernet interface. The value should be

between 0 and 7.

When you are finished configuring the VLAN settings, click the

page 34) to save all changes.

Settings

Figure 10. MTU section of the Settings window

4 • Network—WAN

button (see

Save Internet Settings

figure 9

Table of Contents

Smartlink 4020