Table of Contents
Advertisement
SmartLink 4020 User Manual
•
No Registration—The SmartLink 4020 is not attempting to register with the SIP server because "Send
Registration Request" is not checked on SIP sever setting screen.
•
Error: Not Authorized—A SIP final status message status of 401 or 407 has been received from the SIP
server.
•
Error: Forbidden—SIP final status message status of 401 or 407 has been received from the SIP server.
•
Error 408: Request timeout— A SIP final status message status of 408 has been received from the
SIP server.
•
Response:
—A SIP final status message status of xxx has been received from the SIP server.
User Name
The authentication username that was specified under section
name will be used to register with the VoIP server.
Caller ID Setting
The Caller ID name setting that was specified under section
play name that others will see as your caller id when you make a call.
Subscribed for Voicemail
Shows if the SIP Subscribe message was successful for this phone line. If "Yes", then the subscription process
was successful. The number of voicemail messages in the queue will not be provided if the subscription for
voice mail fails.
Messages waiting
After successful subscription to the SIP server, the SIP server/Internet Telephony service provider should send
the number of voicemail messages that are queued up for the user using the SIP Notify message. The messages
waiting shows the number of normal priority new messages, normal priority old (listened to) messages, number
of urgent priority new voicemail messages and the number of old (listened to) urgent priority voicemail mes-
sages as reported to the SmartLink 4020 by the VoIP SIP server.
SIP
The SIP window contains the following sections:
•
SIP Configuration (see
•
SIP Extensions (see
figure 24
•
RTP Telephone Event Configuration (see
•
VoIP VLAN Configuration (see
•
SIP Parameters (see
figure 27
•
NAT Traversal (see
figure 28
Note
After configuring the sections, click the
figure 28
SIP
figure 22
on page 49)
on page 50)
figure 25
figure 26
on page 51)
on page 51)
on page 52)
on page 52) to save the new configuration.
"Phone 1 & Phone 2"
"Phone 1 & Phone 2"
on page 50)
button (see
Save SIP Settings
6 • Telephony
on page 54. This user
on page 54. This is the dis-
48
Advertisement
Table of Contents
