Hangar 9 fokker D.VII Assembly Manual page 28

o
Step 4
Secure the landing gear leg to the fuselage using
four landing gear straps and eight #4 x 1/2-inch
self-tapping screws. Use a #2 Phillips screwdriver to
tighten the screws.

Step 5
Repeat Step 4 to attach the remaining landing gear leg to
the fuselage as shown.
28

Step 6
Use a drill and 3/32-inch drill bit to drill the four holes
for the screws that secure the landing gear spreader wing
to the legs. Dimples have been molded into the landing
gear wing to locate these holes.

Step 7
Use four #4 x 1/2-inch self-tapping screws and a #2
Phillips screwdriver to attach the wing to the legs.