Table of Contents
Advertisement
|
|
|
|
|
|
System tab
|
Modem tab
v Type a new name in the Friendly Name text box.
v Select a manufacturer in the Manufacturer list box.
v Select a printer in the Printer list box.
v Check the Default Printer check box to assign or remove the printer as the
default printer.
4. Click OK.
You can find memory, build version and system information for your NetVista thin
client on the System tab. You can also perform the following tasks on this tab:
v Update the memory statistics for your NetVista thin client
v Configure global ICA client settings
Follow these steps to update the memory statistics for your NetVista thin client:
1. From the Memory Statistics box, click Update.
2. Click OK to close the Terminal Properties window.
Follow these steps to configure the global characteristics and settings for your ICA
client connections:
1. From the ICA Client Configuration box, click Configure.
2. Configure the global ICA settings using the Global ICA Client Settings tabs.
v Use the Hotkeys tab to establish shortcut keystrokes of your choice.
v Use the Preference tab to set the options of your choice by entering in the
required information in the available text fields.
v Use the Server location tab to list your Network TCP/IP addresses and
Server groups.
v Use the Firewall tab to connect to Socks proxy or choose an alternate proxy
address.
3. Click OK to save your changes and close the window.
4. Click OK to save your changes, and close the Terminal Properties window.
You can add, remove, configure and manage modem connections for a NetVista
thin client on the Modem tab. You can also dial a modem connection from this tab.
Note: If text does not echo while using the Terminal window to dial or configure a
modem, enter in the string "ATZ" to perform a software reset. Your input
text should now be echoed.
Select one of the following options to add or remove a modem connection:
v To add a new modem connection:
1. Click Add.
2. Enter the new name in the field.
3. Click OK.
The new name will appear in the Connection Name pull-down menu.
v To remove a modem connection:
1. Select the connection name from the Connection Name pull-down menu.
2. Click Delete.
Configuring your thin client
15
Advertisement
Table of Contents
