Ppp Routed Wan Service For Security Firewall Example; Ip Address Of Ppp Routed Wan Service - Patton electronics IPLink 2635 Getting Started Manual

Models 2603, 2621, and 2635 Getting Started Guide
Figure 41. PPP routed WAN service for Security Firewall example
6. Click on Edit in the WAN Connections webpage, and then click on the Edit 'Ip Interface' hyperlink.
7. In the Edit Ip Interface webpage, enter the fields as follows and click on the Create button. (See
figure 42.)
Ipaddr: 192.168.101.1
Mask: 255.255.255.0
The next step in configuring the router is to add the default gateway route. The WAN IP address of the routed
PPP WAN service at the CO site is 192.168.101.2, so this will be the gateway IP address on the IPLink.
1. Click on IP routes under Services Configuration in the Configuration Menu.
2. Click on the Create a new Ip route... hyperlink.
Configuring the router
Figure 42. IP address of PPP routed WAN service
7 • Security
70