Dhcp Server; Features And Services Matrix - Patton electronics IPLink 2635 Getting Started Manual

Models 2603, 2621, and 2635 Getting Started Guide
Configured Cannot be
Feature
DHCP Relay
DHCP
Server

DHCP Server

DHCP
Relay
DNS Relay
Bridged
NAT
DHCP Cli-
(WAN
ent
side)
Static IP
(WAN side)
Some comments on figure
Routed means a 'routed WAN service' and Bridged means a 'bridged WAN service.'
DHCP Server and DHCP Relay cannot be used simultaneously.
NAT can be used only if a Routed WAN service is configured.
1
If a DHCP Server were used with a Bridged WAN service, the DHCP server would respond to IP address
requests from both interfaces, that is, the Ethernet and the WAN serial interfaces.
2
When NAT is used together with DHCP Relay, the WAN service must be routed.
3
When DHCP Relay is used with a Bridged WAN service, the DHCP server must be on the same subnet
as the clients and the IPLink.

DHCP Server

Go to the DHCP Server webpage from the Configuration Menu --> Services Configuration --> DHCP Server.
The DHCP server default is disabled. Click on the Enable button to begin the configuration process.
Introduction
Table 4. Features and services matrix
The feature in this column [...] with (Column 1 feature)
Must be
used used
Routed
Routed
4.
8 • DHCP and DNS Configuration
Usually used Can be used Rarely used
Routed,
NAT
Routed
2
NAT
Routed,
DHCP Server
or
DHCP Relay
DHCP Server,
DHCP Relay,
DNS Relay
Routed
1
Bridged
3
Bridged
Bridged
84