Accessing The Switch Through The Web Interface - Avaya 3500 Quick Start Configuration

web-server enable

Accessing the switch through the web interface

You can use EDM to configure and maintain your switch through a web-based graphical user
interface. You can monitor the switch through a web browser from anywhere on the network.
By default, you can access the web interface using Hypertext Transfer Protocol Secure (HTTPS)
only.
For more information about configuring the web server to respond to HTTPS only or to both HTTPS
and Hypertext Transfer Protocol (HTTP) client browser requests, see Configuring Security on Avaya
Ethernet Routing Switch 3500 Series, NN47203-504.
By default, the web interface uses a 15 minute time-out period. If no activity occurs for 15 minutes,
the system logs off the switch web interface, and you must reenter the password information.
To configure inactivity time-out, see Configuring Security on Avaya Ethernet Routing Switch 3500
Series, NN47203-504.
Before you begin
• Ensure that the switch is running.
• Note the switch IP address.
• Ensure that the web server is enabled.
• Note the user name and password.
• Open one of the supported web browsers.
For more information about the supported browsers, see Using ACLI and EDM on Avaya
Ethernet Routing Switch 3500 Series, NN47203-102.
About this task
Use this procedure to access the switch through a web browser.
Procedure
1. Start your web browser.
2. Type the switch IP address as the URL in the Web address field.
http://<IP Address>
OR
https://<IP Address>
3. Enter the user name.
4. Enter the password.
5. Click Log On.
September 2016 Quick Start Configuration
Comments on this document? infodev@avaya.com
Accessing the switch through the web interface
35