Field Descriptions; Configuring A Web And Telnet Password Using Edm - Avaya 3500 Quick Start Configuration

Field descriptions

Use the descriptions in the following table to configure the console switch password.
Variable
Console Stack Password Type
Read-Only Stack Password
Read-Write Stack Password

Configuring a Web and Telnet password using EDM

Use this procedure to configure a Web and Telnet password for an individual switch.
Procedure
1. From the navigation tree, double-click Security to open the Security tree.
2. In the Security tree, double-click Web/Telnet/Console.
3. In the work area, click the Web/Telnet Password tab.
4. In the Web/Telnet Switch Password Setting, select a value from the Web/Telnet Switch
Password Type list.
5. In the Read-Only Switch Password dialog box, type a character string.
6. In the Re-enter to verify dialog box for the Read-Only Switch Password, retype the
character string.
7. In the Read-Write Switch Password dialog box, type a character string.
8. In the Re-enter to verify dialog box for the Read-Write Switch Password, retype the
character string
9. On the toolbar, click Apply.
September 2016
Configuring a Web and Telnet password using EDM
Definition
Specify the type of password to use. Values include:
• none—Disables the password
• Local Password—Use the locally-defined
password for serial console access
• RADIUS Authentication—Use RADIUS
authentication for serial console access
• TACACS Authentication—Use TACACS+
authentication, authorization and accounting (AAA)
services authentication for console access
Specify the read-only password for stack or switch
access.
Specify the read-write password for stack or switch
access.
Quick Start Configuration
Comments on this document? infodev@avaya.com
25