Setup>Automatic Events>Device Tasks - Veeder-Root TLS-450PLUS Operator's Manual

Initial Setup Of The Console Using Workflow Wizard
Setup>Automatic Events>Device Tasks
This screen lists the device tasks currently configured for the console, and it also allows you
to add, edit, or delete these tasks.
Screen Column Descriptions
Ev ID - Identifier automatically assigned to an event by the console.
Time/Event - Event that triggers the task (for example, "Overfill Alarm").
Device/Connection Mode - Label of the device that is involved in performing the function
(usually this is a relay, such as "Relay 1").
Adding or Editing A Task
1. Do the following:
• If editing a task, select a task record to modify (a checkmark appears next to the entry),
Actions>Edit Task
then select
• If adding a task, select Actions>Add Task
.
.
2. Touch the fields below to enter or edit the appropriate
information:
• Device - Select the relay from the list of available relays
on your console (you can also select other devices).
• Trigger - Select a trigger from the list of available trig-
gers (Events). The triggers that you see depend on your
configuration. For example, a console alarm can be a trig-
ger for a device task.
3. Touch
Deleting A Task
1. Select the task record entry that you want to delete (a
checkmark appears next to the entry).
2. Touch Actions
3. Touch
51
Setup>Automatic Events>Device Tasks
to save your settings.
then Delete Task .
to save your settings.