Table 5-17. Contact Alarms; Table 5-18. Auto Events Alarms; Table 5-19. Product Alarms; Table 5-20. Dim Alarms - Veeder-Root TLS-450PLUS Troubleshooting Manual

5
Warning and Alarm Messages
Alarm
Autodial Failed Alarm
Autodial Setup Data Warning
Email Failed
Fax Failed
Alarm
Setup Data Warning
Alarm
Product Setup Warning
Product Threshold Alarm
Alarm
Communication Failure
Alarm
Disabled DIM
Setup Data Warning

Table 5-17. Contact Alarms

Cause
System failed to connect to a remote
receiver after 'n' tries.
Device setup data problem
The console did not successfully send
email when configured to email.
The console did not successfully send
fax when configured to fax.

Table 5-18. Auto Events Alarms

Cause
Device setup data problem

Table 5-19. Product Alarms

Cause
Setup is incomplete or in error.
Periodic variance exceeds threshold.

Table 5-20. DIM Alarms

Cause
DIM module has stopped communicating with the
external equipment or the cable adaptor box.
DIM module has stopped communicating with central
processing unit of the console.
Device setup data problem
Verify the address book settings for the con-
tact are correct (i.e., modem device number,
phone number to dial), verify the receiving
device (fax or modem) is operational. Con-
tact technical support for assistance.
Recheck device setup parameters.
Verify the address book settings for the con-
tact are correct (email address of recipient),
verify network connectivity is available
(Ethernet card is installed). Contact techni-
cal support for assistance.
Verify the address book settings for the con-
tact are correct (fax address of recipient),
verify modem is configured. Contact techni-
cal support for assistance.
Recheck device setup parameters.
Meter Data Present not setup. Tempera-
ture Compensation not setup. BIR Alarm
Threshold and/or Alarm Offset values
incorrect.
The periodic variance of a product
exceeded the BIR calculated threshold.
Reconnect the external equipment or
adaptor box to the TLS.
Verify DIM firmware is correct.
Replace DIM module.
Recheck device setup parameters.
5-11
Displayed Alarm Messages
Action
Action
Action
Action