Harmonic Electra9200 Installation Manual page 84

Appendix A Encoder Physical Specifications
Table A–2: Port Specifications continued
Port Connection
Ethernet management port
Type
Protocol
Connector type
Input serial port
Ethernet output port
Type
Protocol
Connector type
Ethernet input ports
Type
Protocol
Connector type
Fault relay port
Mating connector type
RJ-45 Ethernet Port Pinouts
Table A–3 lists the pinouts for the RJ-45 Ethernet port.
Table A–3: RJ-45 Ethernet Port Pinouts
Pin
1 Transmit data (TD) +
2 Transmit data (TD) –
3 Receive data (RD) +
4 Not connected
5 Not connected
6 Receive data (RD) –
7 Not connected
8 Not connected
© 2015 Harmonic Inc. All rights reserved.
10/100/1000 Mbps
802.3
RJ-45
SMPTE 333 Service
10/100/1000 Mbps
MPEG-2/MPEG-4 over IP
RJ-45
10/100/1000 Mbps
MPEG-2/MPEG-4 over IP
RJ-45
Capable of switching 0.25 amps at 30 VDC
Phoenix 1881 383
Signal
77
RJ-45 Ethernet Port Pinouts
Specification
Electra 9200, Rev O