Chapter 4: Electra 9200 Specifications; General Features - Harmonic Electra9200 Installation Manual

Chapter 4 Electra 9200 Specifications
This chapter contains comprehensive feature specifications for the Electra 9200 encoders, as
well as feature descriptions for some encoding features.

General Features

The following table lists the general features of the Electra 9200 encoders.
Table 4-1: General Features
Feature
Hardware
Chassis Single Rack Unit (1-RU)
n
Mounts in Electronic Industries Association (EIA) standard rack
n
Mounts up to 4 video/audio compression boards
n
Local Two-line, 20-character vacuum fluorescent display (VFD)
n
control 6-button keypad
n
panel Four status LEDs
n
Software
Control NMX Digital Service Manager
n
Front control panel for setting management IP address
n
Software From NMX (see the NMX online help for details)
n
Upgrades
Firmware From NMX (see the NMX online help for details)
n
License
Video input Up to 4 Serial Digital inputs capable per SMPTE 259M (SD-SDI) or SMPTE 292M
n
(HD-SDI)
75 Ohm BNC connectors
n
SD-SDI at 270 Mbps, HD-SDI at1.5 Gbps, or 3G-SDI at 3 Gbps
n
Audio input Default: Embedded
n
Embedded inputs only
n
On-board
a
One 5.1 surround or three stereo pairs
n
audio
Complete embedded audio extraction of eight pairs (synchronous to video) from
n
four groups (48 kHz synchronous to video only)
Dolby Digital
n
Dolby Digital Plus (E-AC-3) pass through
n
Dolby E pass through
n
MPEG-1 Layer II compression; up to three stereo (2.0) pairs
n
AC-3
n
AC-3
n
AAC/HE AAC compression; up to three stereo (2.0) pairs or one 5.1
n
multichannel with MPEG-2 or MPEG-4 encapsulation
Audio description for audio coding
n
© 2015 Harmonic Inc. All rights reserved.
a
(AC-3) 2.0 or 5.1 pass through
a
compression; up to three stereo (2.0) pairs or 1 5.1 multichannel
a
metadata input through VANC
Electra 9200 Specifications
Description
26
General Features
Chapter 4
b
b
Electra 9200, Rev O